FlexGround UltraFlex™

Highest Quality Poured-In-Place Product:

FlexGround UltraFlex is the highest quality, longest lasting rubber safety surfacing on the market. UltraFlex is poured using the same two-layer system as FlexGround Standard and EnduraFlex, but utilizes a smaller (.5mm) granule TPV for the top surface wear course. Elevated urethane ratios bind the smaller granules together for a superior product, which boasts the best elongation and tensile strength in the industry. TPV is a vulcanized product, making it better equipped to withstand daily wear and tear and color-fading due to UV exposure. Flexground UltraFlex is our most durable surface, suitable for all age play areas including water play, and may be installed indoors or outdoors. UltraFlex materials are mixed and applied on-site, so that the thickness can be modified to meet varying critical fall heights. UltraFlex adheres to the ASTM 1292 standard for critical fall heights and comes with a seven year limited warranty.

Color and Urethane:

FlexGround UltraFlex is offered in a wide variety of colors. However, because UltraFlex utilizies smaller granules, we do not recommend mixing colors. Ultraflex utilizes aliphatic urethane only (see the “Aliphatic Advantage”).

Accessibility:

FlexGround UltraFlex is a poured-in-place, stationary surface allowing wheelchairs unhindered access and maneuverability. Heavily used areas under swings and slides are designed to maintain thickness and attenuation.

Specifications:

FlexGround™ UltraFlex Specifications Downloads:  

Product Specification     

Detailed Drawings

Fall Height Chart	Flush Mount to Wall	Flush Mount to Wall New Construction	Turndown Into Sand	Turndown into Sand New Construction	Seam Transition	Installation at Equipment Edge	Tapered Edge With Keyway	Water Play Area	Water Play Area New Construction

FlexGround is a dual-durometer rubber safety surface that is poured in-place and hand-troweled over concrete, asphalt or compacted ABC and is ADA and ASTM 1292 compliant. The bottom “FlexCushion” layer is made from recycled shredded tires, mixed with urethane in a mortar mixer and then hand troweled into place. After a 24hr dry time, the top layer or Wear Course is installed. The Wear Course consists of peroxide cured virgin EPDM (Ethylene Propylene Diene Monomer) rubber that is mixed with urethane in a mortar mixer and then hand troweled at a ½” thickness over the existing cushion layer and left to dry for 24-48 hrs.